Publicité
1) The motor-sweeper must be inspected by a specialist technician who checks its safety or for any damage or defects
in the following cases:
• before it is put into operation
• after modifications or repairs
• at regular intervals, as indicated in the "Routine maintenance and control operations" table.
2) Every six months check that the safety devices are in good working order; the inspection must be made by
authorized specialist staff.
To ensure that the safety devices are operating properly, the machine must be overhauled by skilled staff every 5
years.
3) The person in charge of the machine must make an annual check on its condition. During this check, he must
decide whether the motor-sweeper still complies with the technical safety regulations, and then apply a marker plate
to the machine to indicate that the check has been made.
Periodic maintenance and checks
1
Check the engine oil level
2
Check the engine air filter
3
Cleaning of the motor air filter
4
Change the engine oil
5
Check the tension of the belts
6
Check the battery electrolyte level
7
Check the trace of the main and side brushes
8
Check the level of the hydraulic fluid
9
Replace the hydraulic fluid
10
Check that the main brush does not have string, wire, etc.
entangled up in it.
11
Check the dust filters
12
Replace the dust filters
Atom H
Safety checks
8
Every ..... hours
40
100
500
1500
55
Publicité
