Honeywell MN10CCS Mode D'emploi page 15

CLEANING & MAINTENANCE (CONTINUED)
5. Disconnecting the Window Installation Kit:
• Remove the Exhaust Hose from the unit by pulling away from the unit at the same time.
•
Remove the Window Bracket, Window Bracket Panel Adapter and Exhaust Hose Connector.
•
It is recommended to store the Window Kit parts in a bag together with the Remote Control
and placing them together with the air conditioner unit.
• If needed, you can clean the Window Kit with a damp cloth and water before storing.
Make sure all parts of the Window Kit are dry before storage.
6. Cover the air conditioner with a cloth/ plastic bag before storage, to protect from dust and
scratches collecting on the surface of the unit.
7. It is recommended to coil the power cord before storing to ensure the cord is protected from
bents and creases.
8. Store the air conditioner in a cool, dry place, away from direct sunlight.
EN 12