Proxxon LHW Manuel D'utilisation page 14

IMPORTANT!
Do not use the cutting disc for roughening work.
Risk of fracture!
IMPORTANT!
If the unit overheats, switch it off and allow it to cool.
Maintenance, cleaning and care
ATTENTION!
Disconnect the mains plug prior to every adjust-
ment, maintenance measure or repair!
NOTE!
Every device is dirtied by dust when working. Cleaning
is therefore essential. To ensure a long service life, how-
ever, the machine should be cleaned with a soft cloth or
brush after each use.
Mild soap or other suitable cleaning agent may be used
in this context. Solvents or cleaning agents containing
alcohol (e.g. petrol, cleaning alcohols, etc.) should be
avoided, since these can attack plastic casings.
The apertures required for cooling the motor must al-
ways be kept free of dust and dirt.
Accessories
For more detailed information on accessories, please
request our device catalogue from the address specified
on the last page in the warranty information.
Please note in general:
Proxxon bits and cutters have been designed to work
with our machines, which makes them optimal for their
use.
We will not assume any liability whatsoever for the safe
and proper function of our devices when using third-
party bits and cutters! Service note
Please note: The mains power input may only be re-
placed by our Proxxon Service Department or a quali-
fied specialist!
- 14 -
Disposal
Please do not dispose of the device in domestic waste!
The device contains valuable substances that can be re-
cycled. If you have any questions about this, please
contact your local waste management enterprise or oth-
er corresponding municipal facilities.
EC Declaration of Conformity
Name and address of the manufacturer:
PROXXON S.A.
6-10, Härebierg
L-6868 Wecker
Product designation: LHW
Article No.: 28547
In sole responsibility, we declare that this product con-
forms to the following directives and normative docu-
ments:
EU EMC Directive 2014/30/EC
EN 55014-1:2017/A11:2020
EN 55014-2:2015
EN 61000-3-2: 2019
EN 61000-3-3: 2013/A1:2019
EU Machinery Directive 2006/42/EC
EN 62841-1:2015
EN 62841-2-4:2014/AC:2015
Date: 01.09.2021
Dipl.-Ing. Jörg Wagner
PROXXON S.A.
Machine Safety Department
The CE document authorized agent is identical with the
signatory.