Publicité
Les langues disponibles
Les langues disponibles
Fig. 4
4. Connect the vent hood white wire negative (-) to the
incoming power supply negative (-) wire and the vent
hood black wire positive (+) to the incoming power supply
positive (+) wire. (Fig 5)
NOTE: Make all electrical supply connections in
accordance with local and/or applicable codes. A window
or air vent should be opened slightly while using any
cooking appliance.
Fig. 5
5. Fix the range hood onto the top cabinet with the four screws
provided. (Fig. 6)
Operation
Fan Control
Press the fan button once to turn on the fan, press twice to
turn off. (Fig. 9)
Fig. 9
Cleaning and Maintenance
WARNING
Before carrying out any maintenance or cleaning isolate
the range hood from the mains supply.
The cooker hood must be kept clean, as a build up of
grease or fat can be a fire hazard.
NOTE: DO NOT over tighten the screws.
Fig. 6
6. Verify that the blower housing is free of debris and fan
blades spin freely.
7. Replace the grill cover to the range hood and press the
release tabs until you hear a click. (Fig. 7)
8. The grill cover is securely attached to the range hood.
(Fig. 8)
Fig. 7
Light Control
Press the light button once to turn on the light, press twice to
turn off. (Fig. 10)
Fig. 10
External Cleaning
Wipe the range hood frequently with warm soapy water using
a mild detergent.
NOTE: Never use scouring pads or abrasive cleaners. Never
use excessive amounts of water when cleaning particularly
around the control panel.
Fig. 8
5
Publicité
