ORIGINAL OPERATING INSTRUCTIONS
DSH 700/ DSH 900 cut-off saw
It is essential that the operating instructions
are read before the machine is operated for
the first time.
Always keep these operating instructions to-
gether with the machine.
Ensure that the operating instructions are
with the machine when it is given to other
persons.
Contents
1 These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out cover
pages. Keep these pages open while studying the oper-
ating instructions.
In these operating instructions, the designation "the ma-
chine" always refers to the DSH 700 or DSH 900 gasoline-
powered cut-off saw.
1 General information
1.1 Safety notices and their meaning
DANGER
Draws attention to imminent danger that will lead to
serious bodily injury or fatality.
WARNING
Draws attention to a potentially dangerous situation that
could lead to serious personal injury or fatality.
Parts, operating controls and indicators (DSH 700 /
DSH 900) 1
Forward grip
@
Rear grip
;
Guide wheels
=
Start/stop switch
%
Choke lever / half-throttle lock
&
Throttle safety grip
(
Throttle trigger
)
Decompression valve
+
Fuel pump
§
Starter handle
Page
/
Cutting disc
1
:
Clamping screw
3
·
Hole for locking pin for changing cutting discs
4
$
Clamping flange
5
£
Guard (hood)
6
|
8
Disc guard adjustment grip
¡
11
Water valve
13
Q
Water connection
15
W
Fuel tank cap
17
E
Air filter cover
R
Belt tensioner
18
T
Exhaust / muffler
Z
Spark filter
U
Spark plug connector
I
Type identification plate
O
DSH-FSC saw carriage 2
Grip
@
Throttle trigger
;
Cutting depth adjustment
=
Hold-down device
%
Water tank
&
Water connection
(
Axial adjustment
)
Throttle cable
+
Machine cradle
§
CAUTION
Draws attention to a potentially dangerous situation that
could lead to slight personal injury or damage to the
equipment or other property.
NOTE
Draws attention to an instruction or other useful informa-
tion.
en
1