Far Tools GGB 950 Notice Originale page 39

EN
CABLE CROSS-SECTION TO USE
When using an extension cord, its total lengthshould not exceed 60 meters for
2 2
cross sections of 1,5 mm and 100 meters for cross 2,5 mm .This extension cord
should be protected by a tough flexible rubber steath (IEC 245) or the equivalent
to withstand mechanical stresses.
Mass wire, section: 0,12mm/Ampere. Exemple: 10 Amperes: 1,2 mm
© FAR GROUP EUROPE
118015-Manual-Findd 39 10/06/13 14:12:46