Publicité
Les langues disponibles
Les langues disponibles
3.
Remove the screw (2) and the small block (1) at the bottom of the door and attach them to the other
side.
4.
Remove the bottom screws (3), hinge bracket and adjustable feet (1 & 2) from the bottom of the
appliance.
5.
Attach the screws and hinge bracket to the opposite side of the bottom. Put the adjustable feet
back into place.
6.
Carefully set the door back into place making sure the pin enters the bushing at the lower frame
section (hole).
7.
Before placing the upper hinge, remove the bolt and nut and reverse the direction of the upper
hinge by turning the hinge bracket around and screwing the bolt and nut back on the opposite side.
44
DO91920
Publicité
