OPERATION PRECAUTIONS
STORAGE
• Water condensation or mold may occur on lens surfaces because of high humidity. Therefore, store the
binoculars in a cool, dry place. After use on a rainy day or at night, thoroughly dry them at room
temperature, then store in a cool, dry place.
• For long term storage, keep binoculars in a plastic bag or an airtight container with a desiccant. If this
is not possible, store in a clean, well-ventilated place, separate from the case, as they are easily
a ected by moisture.
• Do not leave the binoculars in a car on a hot or sunny day, or near heat generating equipment. This may
damage or negatively a ect them.
MAINTENANCE & STORAGE
• Remove dust trapped in the focusing unit, diopter adjustment unit, or other rotating parts with a soft
brush.
• After having removed dust with a blower, clean the body surface using a soft, clean cloth. After use at
the seaside, lightly soak a soft, clean cloth with water and wipe o salt that may be on the body
surface. Then wipe the body surface with a dry cloth. Do not use benzene, thinner, or other organic
solvent. Note: A blower is rubber cleaning tool that strongly blows out air from a nozzle.
• When removing dust on the lens surface, use a soft oil-free brush.
• When removing stains or smudges like fingerprints from the lens surfaces, wipe the lenses very gently
with a soft clean cloth. Use a small quantity of pure alcohol (ethanol) or lens cleaner available in stores
to wipe stubborn smudges, from the center of the lens to the outside in a circular motion. Do not use
anything hard as it may scratch the lens surface.
En
Jp
Fr
13