Powerplus POWDP75300 Traduction Du Mode D'emploi D'origine page 43

11 CLEANING AND MAINTENANCE
11.1 Cleaning
▪
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
▪
Regularly clean the machine housing with a soft cloth, preferably after each use.
▪
Keep the ventilation slots free from dust and dirt.
▪
If the dirt does not come off use a soft cloth moistened with soapy water.
▪
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
11.2 Maintenance
Our machines have been designed to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends upon proper machine care and
regular cleaning.
12 TECHNICAL DETAILS
Chuck collet
Power supply
Rotation speed
Drive shaft length
Shaft lock
13 NOISE
Noise emission values measured according to relevant standard. (K=5)
Acoustic pressure level LpA
Acoustic power level LwA
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration)
Copyright © 2022 VARO
POWDP75300
3.2 mm
20 Volt DC
5000 – 33000 min
1m
Yes
80dB(A)
91dB(A)
2.9m/s²
P a g e | 11
-1
K = 1.5m/s²
www.varo.com
EN