Powerplus POWDP75300 Traduction Du Mode D'emploi D'origine page 35

ROTARY MULTI TOOL 20V
POWDP75300
1 INTENDED USE
Your multi tool has been designed for drilling, routing, engraving, polishing, cutting, grinding
and sanding of wood, metal, plastics and stone. Not suitable for professional use.
WARNING! Read this manual and general safety instructions carefully
before using the appliance, for your own safety. Your power tool should
only be passed on together with these instructions.
2 DESCRIPTION (FIG. A)
1. On/off switch
2. Speed dial
3. Shaft lock button
4. Collet chuck
5. Accessories storage
6. Tool holder
7. Rotary tool
3 PACKAGE CONTENT LIST
▪
Remove all packaging materials.
▪
Remove remaining packing and package inserts (if included).
▪
Check that the package contents are complete.
▪
Check the appliance, the power cord, the power plug and all accessories for transportation
damage.
▪
Keep the packing materials as far as possible till the end of the warranty period. Dispose it
into your local waste disposal system afterwards.
WARNING: Packaging materials are not toys! Children must not play with
plastic bags! Danger of suffocation!
1x Rotary multi tool
1x Instruction manual
Accessories (Fig. B) :
4x Buffing wheel (B1)
10x Sanding paper (B2)
1x Plastic box (B3)
1x Polishing compound (B4)
1x Spanner (B5)
1x Wire brush (B6)
3x Grinding wheel (B7)
2x Sanding shank (B8)
If any parts are missing or damaged, please contact your dealer.
Copyright © 2022 VARO
POWDP75300
8. Flexible drive shaft
9. Battery pack (not included)
10. Battery pack release button
11. Battery capacity indicator
12. Button for battery capacity indicator
13. Charger (not included)
14. Charging indications
1x Drill bit 3.2mm (B9)
2x Mandrel (B10) – Buffing wheel mandrel
(B10A) + Sanding paper mandrel (B10B)
3x Diamond bit (B11)
1x Carving bit (B12)
6x Sanding band (B13)
5x Cutting disc (B14)
P a g e | 3
EN
www.varo.com