Domo DO91706R Mode D'emploi page 52

1. Remove the frozen food and place temporarily in a cool location.
2. Disconnect the appliance from the mains socket.
3. To accelerate the defrosting process, place a pan of hot water on a stand in the freezer.
4. Wipe up condensation with a cloth or sponge.
5. Wipe dry the freezer compartment.
6. Plug in the appliance and adjust the temperature control knob as desired.
7. Put the frozen food back in the freezer.
TROUBLE SHOOTING
Frequently, a problem is minor and a service call may not be necessary, use this trouble shooting guide for
a possible solution.
Does not work
· Check connection of power cord to power source.
· Check that the temperature controller is not in the 0 position.
· Plug in unit.
· Use proper voltage.
Cools too frequently
· The temperature setting is too cool.
· Close door securely.
· Be sure that food is cool before inserting.
· Do not keep door open for too long and minimize door openings.
· Use proper voltage.
· Do not place unit close to heat sources or direct sunlight.
Internal temperature not cold enough
· Check connection of power cord to power source.
· Plug in unit.
· Check setting and adjust as needed.
· Close door securely.
· Be sure that food is cool before inserting.
· Do not keep door open for too long and minimize door openings.
· Allow room for air to circulate around unit.
· Use proper voltage.
· Do not place unit close to heat sources or direct sunlight.
Unusual sounds
· The appliance is not level. Readjust the adjusting feet and level the unit.
· The unit is touching a wall or another object. Gently move the appliance.
There is water on the floor.
· The condensation duct is blocked. See the chapter on cleaning.
· Too much condensation has formed in the fridge, causing the reservoir to overflow. Too much
condensation is caused by a heat difference. Is the door closed properly? Have you put hot food in the
fridge? Does the seal still close properly?
52
DO91706R - DO91707R