Amica EHC 933 021 /1 E Notice D'utilisation page 88

OPERATION
Turn on the triple heating zone*
Important!
Only switch on a heating zone by
turning the knob clockwise.Turning
the knob in the opposite direction can
damage the switch.
Within the 0 1  2  3 range of the knob,
the 120 mm inner heating zone operates and
you can adjust the amount of heat transfer-
red to the pan. Turn the knob to the position
marked  to activate the middle (second)
heating zone with a diameter of 175 mm.
Turn the knob to position  to activate the
external (third) heating zone with a diameter
of 210 mm. From that point, you can smoothly
control the amount of heat transferred to a
pan by inner and outer heating zones as the
internal switch will switch both zones off only
after the knob is set to position 0.
*optional
Zone heating indicator
If the temperature of a heating zone exceeds
50°C this is signalled by an indicator which
lights up for that zone.
When the heating indicator lights up it warns
the person using the cooker against touching
a hot heating zone.
For about 5 to 10 minutes after a heating
zone is switched off it will still have residual
heat that can be used, for example to warm
0
up or keep dishes warm without switching on
another heating zone.
88
Zone heating indicator