Publicité
Les langues disponibles
Les langues disponibles
Device description
Illustration A
HEPA filter
1
Base plate
2
Shoulder straps
3
Type plate
4
Battery unlocking button
5
Hip belt buckle
6
Holder for crevice nozzle
7
Hip belt
8
Suction hose port (outside)
9
Fleece filter bag
10
Handle strap
11
Battery pack (sold separately)
12
Suction head
13
Dirt receptacle closure
14
Dirt receptacle
15
Closure strap
16
Chest strap buckle
17
Chest strap (height adjustable)
18
Carrying system
19
Center straps
20
Hard surface/carpet switch
21
Floor nozzle
22
Telescopic wand
23
Eco button (energy-saving mode)
24
Charge indicator
25
Main switch
26
Control unit
27
Suction control
28
Curved handle
29
Suction hose
30
Note
A charger is not included (sold sepa-
rately).
Color coding
● Control elements for the cleaning
process are yellow.
● Control elements for maintenance
and servicing are light gray.
Symbols on the device
Suction hose connection for
right-handed users
Suction hose connection for
left-handed users
1. Unpack the device and install the
accessories.
Illustration B
Initial startup
Inserting the fleece filter bag
Note
Do not use the device without a fleece
filter bag.
1. Unlock and remove the dirt recepta-
cle.
Figure 1
2. Pull the fleece filter bag with rubber
flange over the suction hose port (in-
side).
Figure 2
3. Fit and lock the dirt receptacle.
Figure 3
Inserting the battery pack
1. Slide the battery pack into the bat-
tery holder and lock it in place.
Adjusting the hip belt, chest
strap and shoulder straps
1. Put the device on your back.
2. Engage the buckle of the hip belt
and adjust the hip belt.
Illustration C
3. Engage the buckle of the chest strap
and adjust the chest strap (height
adjustable). Adjust the device to the
body by pulling on the center straps.
Illustration D
English
Preparation
9
Publicité
