Ferroli MD-CCM09 Manuel D'installation Et D'utilisation page 63

From the above table, we can see that the indoor unit has been set weekly timer parameters for two days every
week, namely period 1, 2, 3 of Monday and period 1 of Tuesday. If the weekly timer function is started up, the air
conditioner will run according to the corresponding period setting when it is within the specific period.
Notes to the parameter of period 1 of Monday: The startup time is 07:30 and shutdown time is 18:30. The
running mode is cool with 24 degree and high Speed.
If the air conditioner is running within the set period of the weekly timer and there is other control device to
control the air conditioner, the air conditioner will run according to the set parameter of the control devices (such as
remote controller, line controller and weekly-timer central controller) till to the next set period of the weekly timer.
If the set mode of a period of the air conditioner is Off, it means the weekly timer function of the period is invalid.
For example, the set mode of period 2 of Tuesday is Off, which shows that the set weekly timer function of the
period is invalid.
EN
Cod. 3QE46680 - Rev. 00 - 01/2021
Owner's & Installation manual
29