Publicité
Les langues disponibles
Les langues disponibles
EMG
(long press)
Emergency channels will be automatically selected by pressing the EMG
key (5). First press : emergency channel 1 is activated. Second press:
emergency channel 2 is activated. Third press: return to the current
channel.
The emergency channels are see page 42.
VOLUME ACCESSORY
This function allows you to control the volume of the unit and of an accessory
connected to the 6-pin plug (accessory available soon).
Briefly press the F key (6) and then the MODE key (5) to modify the value.
C0 or stored value flashes.
Use the / keys (4) to change the value.
Press the PTT switch (7) to validate the chosen value.
C0 - VOL button (1) affects internal speaker volume.
C1 - VOL button (1) affects accessory's volume.
C2 - VOL button (1) affects the volume of the internal speaker and of the accessory.
Default value is C0.
6) FREQUENCY BAND SELECTION (F) ~ VOX
FREQUENCY BAND SELECTION (F)
See page 27
VOX
The VOX function allows
transmitting
(or in the optional vox microphone) without pressing the PTT switch (7).
Long press the VOX key (6) in order to
appears on the display. Long press again the VOX key (6) to
function. "VOX" disappears.
VOX SETTING
(Combination 6+6)
1.
Press the VOX/F button (6) once briefly, then press the VOX/F button (6)
a second time for one second to enter VOX ADJUSTMENT mode. "VOX"
flashes, and the active parameter and its value appear in the display. Three
parameters are used to adjust VOX: Sensitivity:
2.
Use the / keys (4) on the unit to
press the PTT switch (7) to
confirm
3.
When all adjustments are done, press PTT switch (7) to
beep sounds to
confirm
the success of the operation.
by speaking into the original microphone
activate
the VOX function. "VOX"
disable
L
/ Anti-Vox:
A
/ Delay:
modify
the current parameter then,
and
select
next parameter.
store
and exit. A long
4.
If no key is pressed for 10 seconds, the unit automatically
VOX SETTING without save.
-
Sensitivity
L
: allows the adjustment of the microphone (original one or
optional vox) for an optimum transmission quality. Adjustable level from
L1 (high level) to L9 (low level). Default value: L5.
-
Anti-Vox
A
: allows disabling the transmission generated by the surrounding
noise. The level is adjustable. AF (according the squelch level) and from A0
(without anti-vox) to A9 (low level). Default value: AF.
Delay time
-
t
: allows avoiding the sudden cut of the transmission by adding
a delay at the end of speaking. The level is adjustable from
to
t
9 (long delay). Default value:
VOX SETTING doesn't activate the VOX function automatically.
7) PTT (Push To Talk)
Transmission key, press to
listen to
to
an incoming communication, TX disappears.
8) 6-pin microphone plug
The plug is located on the front panel of your transceiver, making it easy
to integrate into your vehicle's dashboard.
See Cabling Diagram on page 41.
A) DC-POWER TERMINAL (13.2 V)
B) ANTENNA CONNECTOR (SO-239)
C) JACK FOR EXTERNAL OPTIONAL SPEAKER (8 Ω, Ø 3.5 mm)
C) FUNCTIONS TURNING ON THE UNIT
the
1) KEY BEEP
Some operations like changing the channels, pressing the buttons, etc.
are confirmed by a beep sound.
This beep can be activated or deactivated as follows:
Switch on the unit by holding down the key on the front panel.
B0 indicates that the beep is activated.
t
.
Bf indicates that the beep is deactivated.
26
exits
t
t
1.
transmit
a message, TX is displayed and release
the function
1 (short delay)
Publicité
