Status Screen; Quick Menu - Bosch BDU280P Mode D'emploi

English – 14​

Status screen

connected via Bluetooth®.
It may also display symbols to indicate an activated
Bluetooth® function or a device connected via
Bluetooth® (e.g. a heart rate monitor). The date of the
last synchronization between the smartphone and
Kiox is also shown.
You can access the <Settings> from the bottom sec-
tion.
<Settings>
You can access the settings menu via the status page.
The <Settings> cannot be accessed or changed
while riding.
You can use the – (11) and + (12) buttons to select
the setting you want. You can open the settings, as
well as any additional submenus, using the select but-
ton (9). You can use the < button (10) to go back to
the previous menu from any settings menu.
You can find the following superordinate sections on
the first navigation level:
– <Registration> – Registration notification:
This menu item is only shown if you have not yet
registered on eBike Connect.
– <My eBike> – Your eBike settings:
You can reset the counters (such as the number of
kilometers traveled that day or average values) to
zero either automatically or manually, and you can
reset the range. You can change the wheel circum-
ference value that was preset by the manufacturer
by ±5%. If your eBike features eShift, you can also
configure your eShift system here. The bicycle man-
1 270 U20 XBK | (27.03.2019)
As well as the status bar,
the status page also
shows you the current
time, the state of charge
of all your eBike's batter-
ies, and the state of
charge of your smart-
phone battery, provided
that the smartphone is
ufacturer or dealer may base the service date on the
distance traveled and/or a period of time. The due
date for the service is displayed under <Next Ser-
vice: [DD. Mon. YYYY] or at [xxxxx] [km]>. The
bike component page displays the serial number
and hardware and software versions for each com-
ponent, in addition to other key data that is relevant
for the components.
– <My profile> – Active user data
– <Bluetooth> – Switch the Bluetooth® function on
or off:
Connected devices are displayed.
– <Sys settings> – A list of options for adjusting the
settings of your on-board computer:
You can display the speed and distance in kilome-
ters or miles, display the clock in 12- or 24-hour
format, adjust the time, date and time zone and se-
lect your preferred language. You can reset the Kiox
to its factory settings, run a software update (if
available) and choose between a black or white de-
sign.
– <Information> – Information about your Kiox:
References to FAQs (frequently asked questions),
certifications, contact information, license informa-
tion
You can find a detailed description of each parameter
in the online operating instructions at
www.Bosch-eBike.com/Kiox-manual.

Quick Menu

Selected settings are displayed via the Quick Menu.
These settings can also be changed while riding.
You can access the Quick Menu via the select but-
ton (9). It cannot be accessed from the Status
screen.
The following settings can be changed via the Quick
Menu:
– <Reset trip data?>
All data on the distance traveled so far is reset to
zero.
EN-95
Bosch eBike Systems