Télécharger Imprimer la page

Atag KD86178CN Mode D'emploi page 117

Publicité

Les langues disponibles

Les langues disponibles

OPERATING THE APPLIANCE
Every time the appliance is switched on again, it takes a while until the correct
temperature is reached. For this reason, the alarm is disabled for the first 24 hours after
the appliance is switched on to prevent the unnecessary activation of the alarm.
Stopping the alarm
1. Touch any key to stop the alarm.
The alarm will stop sounding.
The alarm key and the set temperature shown in the display continue to flash while the
temperature is still too high.
When the alarm is not stopped manually and the temperature remains too high, the signal
will sound for the first minutes of every half hour and when the door is opened.
Power failure alarm
Always check the food in the appliance when 'PF' is shown in the display! Food can spoil
at a temperature that is too high.
Stopping the alarm
1. Touch any key to stop the alarm.
The alarm will stop sounding.
The set temperature will be shown again in the display.
The alarm key and the set temperature shown in the display continue to flash while the
temperature is still too high.
When the alarm is not stopped manually then the signal will sound for the first minutes of
every half hour and when the door is opened.
The appliance cannot cool/freeze during a power failure. Once the
power has been restored, the temperature in the appliance will be
measured. A signal will sound when the temperature in the appliance is
too high. The alarm key will flash and 'PF' (Power Failure) will be shown
in the display.
EN 21

Publicité

loading

Ce manuel est également adapté pour:

Kd85178cdcKd84178cdcKd85178cd