Install the Camera
Installation Precautions
• Do not face the camera to any light source.
• Do not point the camera at glass windows or reflective objects. Otherwise, it may result in poor image
performance due to reflections from infrared LEDs, ambient lights or status lights.
• Do not mount the camera in shaded area, and point the camera towards a well-lit area. For better image
quality, make sure the camera and the captured subject are at the same lighting conditions.
• It is recommended that the camera be installed as far away as possible from electronic devices such as
microwaves, televisions, radio phones and baby monitors to prevent signal interference.
• It is recommended to clean the lens with a soft cloth from time to time. Make sure the power port is not
exposed to water or moisture, or blocked by dirt or other things.
• Do not install the camera where rain and snow may hit the lens directly.
• Camera may work in extremely cold conditions as low as -20°C as it will produce heat when powered on.
You may power the camera indoors for a few minutes before installing it outdoors. (Only for outdoor
cameras)
7 - English