Publicité
OPT5
OPT6
40
All manuals and user guides at all-guides.com
English
11. Optional vacuum kit usage
4) Installing Elbow and Dust Bag (OPT5,6)
1. Open the fastener of the dust bag.
2. Insert the elbow convex groove into the dust bag
elbow opening.
Continue to push the elbow convex groove until
the convex hits against the dust bag opening.
Close the dust bag fastener.
3. Fit the elbow groove with discharge port
projection, turn the elbow and mount the dust bag
to the main unit.
(6) Convex Groove
(7) Convex End
(8) Groove
■ DUST COLLECTING OPERATION
• Put the dust bag belt on the shoulder, and adjust the
length of the belt so as to permit easy operation.
• Confirm that the dust bag is not twisted, pull the
throttle trigger, and start dust collecting operation.
• Detach the dust bag from the main unit when it is full
of dust, open the dust bag fastener, and dispose of
dust.
WARNING
Never suck in any liquid or lit cigarette.
• It will lead to an electric shock or burn.
NOTE
• Never suck in large wood chips, metal, glass, small
stones or other foreign materials.
• A filled dust bag will lessen dust-collecting capacity.
It is advisable to discharge dust before it becomes
too much.
(A) Indicates Warning, Danger, and Caution.
(B) Keep work area clear of other per-sons and
pets.
(C) Risk of long hair being drawn into air inlet.
(D) Wear head, eye, and hearing protection when
operating this equipment.
(E) Do not run unit while vacuum door is
unsecured.
Publicité
