Télécharger Imprimer la page

Suntec Wellness Klimatronic COOLFIXX 3.5 Eco R290 APP Mode D'emploi page 17

Masquer les pouces Voir aussi pour Klimatronic COOLFIXX 3.5 Eco R290 APP:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 31
Frost protection
In cooling, dehumidifying, heating and sleeping modes, the unit has an automatic frost protection
function designed to protect the unit at low temperatures. The device also has an automatic defrosting
function.
Connection to the Wifi and the Suntec Wellness APP
• Please download the "SUNTEC Wellness" app from the App Store or Google Play and install it.
• Please create a user account after the installation.
• Please activate the Bluetooth access in the settings of your mobile device.
• Please place the device within 5 meters of your router.
• As soon as you have connected the device to the power, the WiFi indicator flashes. If no connection
attempt is made for 3 minutes, the indicator on the device goes out.
• To establish a new connection, please press the "WiFi" button for approx. 3 seconds until the WiFi
indicator flashes quickly.
• Please follow the steps below in the app as soon as the indicator flashes:
Please select "Add device".
Please select under the category "large household appliances", "portable air conditioner" and
then follow the instructions on your mobile phone screen.
As soon as the device is successfully connected, the WiFi indicator lights up constantly.
The device works with the most popular voice assistants from Amazon and Google.
In order to use the voice function of Amazon or Google, it is necessary to couple the device
once with the "SUNTEC Wellness" app. All further steps are displayed in the app.
To remove the device from the WLAN, please press the "WiFi" button for approx. 3 seconds
until the WiFi indicator disappears.
If you have any further questions about the app, please visit our web page at
wellness.de/suntec-app/
Emptying of the water tank
As soon as the water tank is full, the "WF" blinks on the display,
the standby mode automatically turns on, it will sound the
warning alarm and all the buttons will be locked until the tank is
emptied.
Turn off the power and unplug the power cord. To empty of the
water tank you need to remove the rubber stopper on the
bottom of the unit and let the water leak into a container. Once
you reboot the device, it will work normally.
Continuous drainage (only in dehumidifying mode): Remove
the rubber stopper on the bottom of the unit and connect the
drainage hose to the opening. Let the water leak into a
container (pic.5).
Suntec Wellness App Download
www.suntec-
Pic.5

Publicité

loading