Suntec Wellness Klimatronic COOLFIXX 3.5 Eco R290 APP Mode D'emploi page 15

1 Air outlet
2 Control panel
3 Carrying handle
4 Castors
5 Power cable
Exhaust hose installation
• Place the unit on a flat surface near a power socket, but at least 50cm away to other objects (see pic.1)
• Connect the exhaust hose adapters with one end each of the exhaust hose by turning. Then, fix the
exhaust hose at the back of the portable local air conditioner (see pic.2).
• Temporary exhaust hose installation: Please lead the free end of the exhaust hose out of the window
(see pic.3).
Exhaust hose installation with window kit: Depending on your type of window, insert the window kit
•
horizontally or vertically into your window. Lead the exhaust hose through the hole at the window kit
(see pic.4).
Make sure that the outlet is not blocked to prevent damage to the unit.
•
The exhaust hose should not be bent.
•
Pic.1
Control panel
1. swing
2. timer
3. fan speed
4. temperature / timer +
5. display
6. temperature / timer -
7. mode
8. sleep mode
9. power
10. wifi- button
1. POWER (9): Press the button to turn the unit on or off. The unit automatically starts in cooling mode with low
fan speed.
2. MODE (7): Press the Mode button after starting the unit to select between cooling, heating, dehumidifying or
fan mode.
3. FAN SPEED (3): Press the Fan button after starting the unit and adjust the desired fan speed.
4. TEMPERATURE - / TEMPERATURE + (4 / 6): Switch the unit into the cooling mode and use these buttons
to adjust desired room temperature (16-32°C).
6 Air inlet / filter grille with dust filter
7 Outlet hose connection
8 Air inlet / filter grille with dust filter
9 Drainage opening
10 Drainage hose connection
Pic.2 Pic.3 Pic.4