Hendi 210000 Manuel De L'utilisateur page 14

139 Towing bracket sliding axle
GB
140
141
142 Button of towing bracket
143
144
145 Fine grinding wheel Ø 45
146 Pin of burr cleaning wheel
147 Spring of burr cleaning wheel
148 Crude grinding wheel Ø 45
149 Sharpener tighten knob
150 Supporting base of outer ring
151
152 Pin of rubbing stone
153 Sharpener base of subassembly
154 pin of blade guading ring
155
156/
Meat blocking board
156A
157 Bracket of sliding axle
158 Small belt wheel of motor
159 Slide transmitting wheel
160 Towing bracket handle
161
162
163
164 Ø 20 Spring gasket for bearing
165 Ø 47 Spring gasket for hole
166 Blade guard disc square-head nut
167 Fixed-arm handle bolt
168
169
170
171
172 Bracket bottom bolt
173 Quadrate axis locking screw
174 Slide axle briquetting bolt
175
176 Ø 12 Under spring gasket
177 Meat scraping shim
178
14
Quadrate axis
Towing bracket
Sharpener mulch
Button
Ø 4.751 Wheel
Pin of food tray
Sliding axle608
Belt wheel setting
Sharpener setting
Finger baffle bolt
Finger baffle nut
Bracket knob bolt
Bracket knob nut
Slide axle bolt
Meat scraper bolt
1 179
1 180
1 181
1 182
1 183
2 184
1 185
2 186
2 187
2 188
1 189
1 190
1 191
1
Precautions
1
• The appliance should only be handled by highly qualified peo-
ple who follow the safety measures described in this manual.
2
• In case of rotation of personnel, training should be provided
1
in advance.
• The appliance is equipped with safety devices at dangerous
1
points. However, it is recommended not to touch the blade
and moving components.
1
• Before starting maintenance operations, disconnect the pow-
1 er supply.
• Carefully assess residual risks when protective devices are
1
removed for cleaning and maintenance.
1
• Cleaning and maintenance require great concentration.
• Is absolutely necessary a regular control of the power supply
1
cord. A frayed or damaged cord can expose users to great risk
1
of electric shock.
• If the device shows anomalies, do not use it or try to repair it:
1
please contact the supplier.
1
• Do not use the appliance for frozen products, meat, fish with
bones or any products other than food.
1
• When dealing with a small portion of meat, do not use the
1
appliance without using the meat pusher.
• Do not stand in a dangerous position, the blade can cause
1
injury.
2
• The manufacturer and/or the seller are not responsible in the
following cases:
2
- if the appliance has been handled by unauthorised person-
1
nel;
- if some parts have been replaced with non-original spare
1
parts;
1
- if the instructions included in this manual are not followed
precisely;
2
- if the cutter has not been cleaned and oiled with the right
4
products.
1
Safety system installed
1
Mechanical safety system
The mechanical safety system of the appliance described in this
2
manual complies with 2006/42 EC directives and EN 1974 reg-
1
ulations. The safety system includes:
Fulcrum bearing shim
Fulcrum bearing bolt
Stainless steel lock
Magnet
Magnet switch
Limited block
Microswitch
Tray bearing cover A
Tray bearing cover B
Fulcrum bearing shim
Oil seal
Stainless steel bar
Set screw for tray bracket
2
2
1
1
1
1
1
1
1
1
1
1
1