Annovi Reverberi HPJ 8.12 REG EM Manuel D'utilisation Et D'installation page 33

Safety recommendations for handling and lifting
Before starting the operations, organise the intended
working area so that the materials can be safely lifted
and handled.
Unloading, loading, handling and lifting operations
must be carried out by skilled, authorised, specifically
trained staff.
Transport
WARNING
Do not stack the packages as they are not built to
withstand such treatment.
The type of packaging used is based on the selected
transport vehicle, the number of electric pumps to be
sent and the destination.
For sea transport, suitable packaging is used to prevent
corrosion of the components.
The illustration alongside shows the most
common types of packaging used.
A) Packaging with pallet and protective
nylon cover
B) Packaging with wooden crate and
pallet
Storage
Upon receipt, the owner must prepare a suitable area for
placing and storing the merchandise.
The storage area must have a stable resting surface that
can support the load and is void of the risk of fire and
explosion.
English
HANDLING AND TRANSPORT INSTRUCTIONS
UN004318-GM
During lifting and handling operations, the people
not involved in the operations must remain at a safe
distance.
Use forklift trucks that have adequate moving and
lifting capacity.
The packages can be loaded directly in the transport
vehicle or inside suitable containers for transport via sea,
air or to distant destinations.
Every shipment is accompanied with a packing list
containing a list and description of the packages.
Upon reception of the merchandise, check that all
components are present and intact. If items are missing
or damaged, contact the importer or manufacturer to
determine the procedures to be followed.
Do not store in places where the ambient conditions
might impair the operating condition of the merchandise
over time.
33
4
Use and Installation