Garland SET KEEPER 20V 252 Manuel D'instructions page 32

English
5. START UP INSTRUCTIONS
5.1. LIST OF MATERIALS
The machine includes the following elements that you
will find in the box:
• Machine.
• Bar cover
• Protector.
• Protector Screw
• Instruction manual.
Remove carefully all the elements from the box and
make sure that all listed parts are included.
Check all the elements of the machine to ensure
that there are no damaged elements. If you find any
damaged part or there are any elements missing,
do not use the machine until the problem has been
solved or you have been given the missing parts.
Usage of the machine with defective or missing parts
is dangerous and could result in personal injuries.
5.2. MMOUNTING
5.2.1. PROTECTOR ASSEMBLY
Place protector as shown this picture. Insert the
screws and tighten.
5.3. START UP
5.3.1. CHECKING POINTS PRIOR TO USING THE
MACHINE
Do not use the machine if it is damaged or not well
regulated.
Use this machine to do jobs for which it has been
designed. Any other use could be dangerous to the
end user, for the machine and to other people, animals
and things that are nearby.
Verify that:
- The machine completely and look for loose parts
(screws, nuts, etc.) and damages.
- That the moving parts of the machine are not in
contact with any object.
- Ensure that the protector is well fixed to the
machine.
Press, repair or replace everything you need before
using the machine
Before start up, remove the security blade protector
from the blade.
5.4. START AND STOPPAGE
Turning on the machine:
Install the battery.
Press the safety switch (8) and without releasing it,
press the ON/OFF switch (2).
Disconnection of the machine:
Release the ON/OFF switch (2), remove the battery.
32/124