Atag WS9211FM Notice D'utilisation page 49

USE
Clean Air function:
The Clean Air function allows you to freshen the air in your kitchen
automatically for a maximum of 24 hours.
• Please ensure that the cooker hood is switched off.
• Press button 'A' until the 'Clean Air' indicator 'G' lights up.
The cooker hood switches on automatically for 10 minutes every hour
at the lowest speed setting. During extraction, LED 1 will light up.
If the hood switches off after 10 minutes, indicator 'G' will flash until
the hood switched on again after 50 minutes.
• Switch off the Clean Air function early by pressing a random button
(except the one for lighting).
Switching on the Timer
• Switch on the cooker hood with button 'A'.
• Adjust the extraction strength level with button 'B'.
The timer can be switched on with every setting, except the
intensive setting.
• Press the Timer button 'D'.
The cooker hood switches off automatically after 15 minutes. Switch
off the Timer function by pressing button 'D' again or by switching
off the cooker hood with button 'A'.
Grease filter indication
After 30 working hours, the filter indication 'F' will light up.
• Clean the grease filter.
• Reset the filter indicator. While the hood is switched off, press
button 'B' for 3 seconds until the filter indicator is turned off.
Carbon filter indicator
After 120 working hours, the filter indication 'F' will flash.
• Replace the carbon filters.
• Reset the filter indicator. While the hood is switched off, press
button 'B' for 3 seconds until the filter indicator is turned off.
EN 7