Publicité
Les langues disponibles
Les langues disponibles
GROUNDING
Improperly connecting the ground-
WARNING
ing wire can result in the risk of
if you are in doubt as to whether the outlet is
properly grounded. Do not modify the plug pro-
vided with the bench. Never remove the ground-
ing prong from the plug. Do not use the bench if
the cord or plug is damaged. If damaged, have it
electrician.
Benches with Three Prong Plugs
Benches marked "Grounding Required" have a
power strip with a three wire cord and three prong
grounding plug. The plug must be connected to a
properly grounded outlet (See Figure A). If the
power strip should electrically malfunction or break
down, grounding provides a low resistance path to
carry electricity away from the user,
reducing the risk of electric shock.
The grounding prong in the plug is
connected through the green wire
inside the cord to the grounding sys-
tem in the power strip. The green wire in the cord
must be the only wire connected to the power strip's
grounding system and must never be attached to an
electrically "live" terminal.
Your power strip must be plugged into an appropriate
outlet, properly installed and grounded in accordance
with all codes and ordinances. The plug and outlet
should look like those in Figure A.
SPECIFICATIONS
Cat. No. .............................................. 48-22-8586P
Shelf Capacity ................................150 lbs. (68 kg)
Door Storage Bins Capacity ...............20 lbs. (9 kg)
Total Capacity .............................2000 lbs. (907 kg)
AC Input Volts ....................................................125
Hertz ....................................................................60
Amps ...................................................................15
USB Output Volts...................................................5
USB Amps ..........................................................2.1
Recommended Ambient Operating
Temperature ...........0°F to 104°F (-15°C to 40°C)
ASSEMBLY
Be sure to follow the assembly in-
CAUTION
structions for the appropriate
locker. Do not use power tools to assemble
locker. Tighten bolts with hand wrenches.
Tools Required
Phillips
Safety
screwdriver
glasses
Hardware Included
NOTE: Items not shown to actual size.
Fig. A
10 mm
13 mm
Wrench
Wrench
Hardware
Item
AA
BB
CC
DD
EE
FF
GG
HH
II
JJ
KK
LL
Item
(only for use when connecting to
storage unit that has 6" casters)
5" x 2" swivel caster
3
Description
Bolt
M8 x 40 mm
Steel washer
19 x 8.5 x 2 mm
Screw Bolt
M6 x 16 mm
Steel washer
18 x 6.5 x 1 mm
Bolt
M6 x 24 mm
Steel washer
16 x 8 x 1.2 mm
Screw bolt
M4 x 16 mm
Screw bolt
M4 x 12 mm
Anti-tip cable
Wall bracket
Screw
ST5.5 x 70 mm
Wrench
Description
Door storage bin
Shelf
Cord bracket
Caster riser plate
Red plastic plug
Red plastic plug
Quantity
16
16
8
8
2
4
8
4
2
2
4
1
Quantity
3
4
2
2
4
5
5
Publicité
