Before Use; Faceplate - Kenwood KDC-X303 Guide De Démarrage Rapide

BEFORE USE

IMPORTANT
• To ensure proper use, please read through this Guide before using
this product. It is especially important that you read and observe
Warnings and Cautions in this Guide.
• Please keep the Guide in a safe and accessible place for future
reference.
Warning
Do not operate any function that takes your attention away from safe
driving.
Caution
Volume setting:
• Adjust the volume so that you can hear sounds outside the car to
prevent accidents.
• Lower the volume before playing digital sources to avoid
damaging the speakers by the sudden increase of the output level.
General:
• Avoid using the external device if it might hinder safe driving.
• Make sure all important data has been backed up. We shall bear no
responsibility for any loss of recorded data.
• Never put or leave any metallic objects (such as coins or metal
tools) inside the unit to prevent a short circuit.
• If a disc error occurs due to condensation on the laser lens, eject
the disc and wait for the moisture to evaporate.
• USB rating is indicated on the main unit. To view, detach the

faceplate.

• Depending on the types of cars, the antenna will automatically
extend when you turn on the unit with the antenna control wire
connected. Turn off the unit or change the source to STANDBY
when parking at a low ceiling area.
4
BASICS
Faceplate
Volume Loading
knob slot
Detach button
Lights up when Bluetooth connection is established.
Attach Detach
To
Turn on the power
Adjust the volume
Select a source
Change the display information
Display window
/ / /
How to reset
Reset the unit
within 5 seconds
after detaching the
faceplate.
On the faceplate
Press B SRC.
• Press and hold to turn off the power.
Turn the volume knob.
Press B SRC repeatedly.
Press DISP repeatedly.
USB input
terminal
Auxiliary input
jack
: