Kenwood KDC-X303 Guide De Démarrage Rapide page 13

BLUETOOTH®
Depending on the operating system and the firmware version of your
mobile phone, Bluetooth features may not work with this unit.
Connect the microphone
Connect the supplied microphone to the microphone input jack on the rear
panel.
Adjust the
microphone
angle
Pair and connect a Bluetooth device for the first time
Press B SRC to turn on the unit.
1
2
Search and select the name of your receiver ("KDC-X3 "/"KDC-BT3 "/
"KDC-BT3 /BT2 "/"KDC-MP3 "/"KMR-D3 ") on the Bluetooth device.
"PAIRING" "PASS XXXXXX"
KNOB" appears on the display.
• For some Bluetooth devices, you may need to enter the Personal
Identification Number (PIN) code immediately after searching.
3 Press the volume knob to start pairing.
"PAIRING OK" appears when pairing is completed.
Secure using cord
clamps (not supplied)
if necessary.
"Device name" "PRESS" "VOLUME
Once pairing is completed, Bluetooth connection is established
automatically.
• / /
indicator on the faceplate lights up.
• / /
"BT2" on the display window lights up.
Answer a call
Press or the volume knob or one of the number buttons (1 to 6).
• To adjust the phone volume [00] to [35], turn the volume knob.
• To end a call, press .
Audio player via Bluetooth
1 Press B SRC repeatedly to select BT AUDIO.
• Pressing enters BT AUDIO directly.
2
Operate the audio player via Bluetooth to start playback.
To
Play back/pause
Select group or folder
Reverse skip/Forward skip
Reverse/Fast-forward
Repeat play
Random play
/ : "BT1" and/or "BT2"
/ : "BT1" and/or
On the faceplate
Press 6 IW.
Press 2 / 1 .
Press .
Press and hold .
Press 4 repeatedly.
Press and hold 3 to select [ALL RANDOM].
9