Other Information - Kenwood KDC-X303 Guide De Démarrage Rapide

Illumination Color Setting
For / /
preferred illumination color for each zone.
1 Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [DISPLAY], then press the knob.
3
Turn the volume knob to select [COLOR SELECT], then press the knob.
4
Turn the volume knob to select a zone ([ALL ZONE], [ZONE 1], [ZONE 2]),
then press the knob.
5
Turn the volume knob to select a color for the selected zone, then
press the knob.
[INITIAL COLOR]/[VARIABLE SCAN]/[CUSTOM R/G/B]/
[RED1]/[RED2]/[RED3]/[PURPLE1]/[PURPLE2]/[PURPLE3]/
[PURPLE4]/[BLUE1]/[BLUE2]/[BLUE3]/[SKYBLUE1]/
[SKYBLUE2]/[LIGHTBLUE]/[AQUA1]/[AQUA2]/[GREEN1]/
[GREEN2]/[GREEN3]/[YELLOWGREEN1]/[YELLOWGREEN2]/
[YELLOW]/[ORANGE1]/[ORANGE2]/[ORANGERED]
8
/ , you can set your
6 Repeat step 4 and step 5 to set color for other zones.
7 Press and hold to exit.

OTHER INFORMATION

For playback operations of AUX, SPOTIFY, Pandora®, iHeartRadio®,
SiriusXM® Radio sources, refer to the INSTRUCTION MANUAL on the
following website: <www.kenwood.com/cs/ce/>
• The availability of each source vary depending on the model.
Note for specifications
Bluetooth Frequency Range:
2.402 GHz — 2.480 GHz
Bluetooth RF Output Power (E.I.R.P.):
+4 dBm (MAX), Power Class 2
Speaker Impedance:
4 Ω — 8 Ω
Operating Voltage:
12 V DC car battery