Ellrona VF 50 Mode D'emploi page 40

17.5 Use of the function "Adjustable vacuum strength"
Since the pressure of the vacuuming becomes too strong for specific foods and these
could be crushed in the bag, you can adjust the length and strength of the vacuuming
process via the function "Adjustable Vacuum strength". So you can adjust the vacuum
strength to the consistency of your vacuum food and also seal soft foods (for example
berry fruit) without crushing them.
Due to the time and pressure control, the crushing of delicate foods is prevented. You can
also use this function for the packaging of juicy foods to prevent that fluids are aspirated
and drawn out.
If you want to seal soft food, then press button Speed for adjustable vacuum strength and
choose "gentle." The default setting is "normal"
17.6 Use of the function "selectable welding time"
When there are fluids in the bag and hence in the section where you want to seal it, the
welding procedure should be adjusted to "moist. This would increase the welding time
and the bag is safely sealed. Press the button "Food". If the lamp will illuminate above
"moist", the welding time for moist vacuum food is adjusted.
17.7 Vacuuming a canister
Connect the vacuum hose at air intake and at your canister and press button canister.
The canister will be vacuumed automatically. You can stop the process at any time with
button stop.
17.8 Opening a sealed bag
Cut the bag straight across with scissors or the cutter, just inside the seal.
17.9 Storage
Keep your device on a flat and safe place, out of the reach of children.
► Always unplug the appliance from its outlet immediately after using and before
cleaning.
► For the correct storage, please slightly close the cover, do not lock, it will deform the
gaskets and affect the machine function.
18 Cleaning and Maintenance
This chapter provides important information on properly cleaning and maintaining your
vacuum sealer.
Ellrona VF 50
PLEASE NOTE
40