AKO 16524A Guide Rapide page 33

Inputs and outputs
Connected probes
In0
I00
Configuration of digital input 1
0= Deactivated
I10
3=Severe external alarm 4=Change of SP
6=Defrost block
Polarity of the digital input 1
I11
0=Activates on closing contact; 1=Activates on opening contact
Configuration of digital input 2
1=Door contac
4=Change of SP
I20
7=Register probe 8=Probe 2° evaporator ** 9=High pressure switch for Hot Gas
10=2nd cold room temperature probe
12=Remote Stand-by
Polarity of the digital input 2
I21
0=Activates on closing contact; 1=Activates on opening contact
Configuration of relay AUX1 0=Deactivated
O00
2=Light
Configuration of relay AUX2
0=Deactivated
O10
4=Door frame resistance
6=Same as solenoid status
Exit to level 1
EP
Alarm HACCP
h1 Maximum temperature of HACCP alarm
XCP
h2 Maximum permitted time for activation of the HACCP alarm (0=Disabled)
Exit to level 1
EP
Information (Reading only)
InI Option chosen in the configuration wizard
tid
Pd Pump down active?
pu Programme version
pR Programme revision
bu Bootloader version
bR Bootloader revision
paR Parameter map revision
Exit to level 1
EP
*
According to wizard.
It can only be modified using the configuration wizard (InI).
Description
1=Probe 1 (Cold room)
2=Probe 1 (Cold room) + Probe 2 (Evaporator)
1=Door contact
7= Low pressure switch 8=Remote Stand-by
2=2=External alarm
5=Remote defrost
3=Virtual control
1=Alarm
5=Defrost 2° evaporator
7=Same as unit status
Description
Description
0=No 1=Yesi
33
2=External alarm
5=Remote defrost
0= Deactivated
3=Severe external alarm
6=Defrost block
11=Product temperature
1=Compressor/Resistor sump
2=Light 3=Virtual control
8=Drainage resistor
1652H4A11 Ed. 10
Value Min. Def. Max.
1 2 2
0 * 8
0 * 1
0 0 12
0 0 1
0 * 3
0 2 8
Value Min. Def. Max.
ºC/ºF -50 99 99
h. 0 0 255
Value Min. Def. Max.