AKO 16524A Guide Rapide page 29

Extended programming menu
Use the extended programming menu to configure all of the unit's parameters in order to adapt it to your installation
requirements. Press the SET key for 6 seconds to access it.
IMPORTANT: If the password function has been configured as a keypad lock (b10=2), or as an access
to parameters block (b10=1), you will be requested to enter the password programmed in PAS when
attempting to access either of the two functions. If the entered password is not correct, the unit will go
back to showing the temperature.
IMPORTANT: Certain parameters or menus may not be visible depending on the configuration of the
rest of the parameters.
Extended programming menu
OUT OF
PROGRAMMING
20 sec.
Temperature
indication
6 sec.
IN PROGRAMMING
20 sec.
Level 1 Level 2
OK
Menus Parameter
Change
parameter
Change
menu
OK
29
1652H4A11 Ed. 10
Level 3
OK
Values
Change
value
20 sec.
OK
OK