Publicité
Les langues disponibles
Les langues disponibles
10
www.aeg.com
Programme
AUTO Sense
Machine Care
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.
Information for test institutes
To receive the necessary information for
conducting performance tests (e.g.
according to EN60436), send an email to:
info.test@dishwasher-production.com
In your request please include the
product number code (PNC) found on
the rating plate.
6. BASIC SETTINGS
You can configure the appliance by
changing basic settings according to
your needs.
Number Setting
1
2
3
4
5
6
1) For more details, refer to the information provided in this chapter.
You can change the basic settings in
setting mode.
When the appliance is in setting mode,
the bars of the ECOMETER represent
Water (l)
1)
10.4 - 13.3
9.7 - 11.8
Values
Water hardness
From level 1L to
level 10L (de-
fault: 5L)
Rinse aid level
From level 0A
to level 6A (de-
fault: 4A)
End sound
On
Off (default)
Auto door open On (default)
Off
Key tones
On (default)
Off
Latest pro-
On
gramme selec-
Off (default)
tion
Energy (kWh)
0.76 - 1.22
0.60 - 0.73
For any other questions regarding your
dishwasher please refer to the service
book provided with your appliance.
1)
Description
Adjust the level of the water softener ac-
cording to the water hardness in your area.
Adjust the level of the rinse aid according
to the necessary dosage.
Activate or deactivate the acoustic signal
for the end of a programme.
Activate or deactivate the AirDry.
Activate or deactivate the sound of the
buttons when pressed.
Enable or disable the automatic selection
of the most recently used programme and
options.
available settings. For each setting, a
dedicated bar of the ECOMETER flashes.
Duration (min)
120 - 170
60
Publicité
