Kreg KWS1000 Guide D'utilisation page 6

CUTTING SETUP
4
3
2
1
(1) Two Mobile Project Centers placed maximum 7 feet apart.
(2) Support Brackets in upper position, one 2x4 in each pair of Brackets.
(3) Sacrificial 2x4 installed on each Mobile Project Center.
(See MOUNTING A SACRIFICIAL 2X4.)
(4) ¾" plywood rests on 2x4s and sacrificial 2x4s.
(5) Distribute weight uniformly.
WARNING
Maximum 2,200 lb. [998 kg.] load
MOUNTING A SACRIFICIAL 2x4
1
(1) Fasten the Trak Bushings to the 2x4 and (2) slide them onto the T-slot.
ADJUSTING BENCH CLAMP PRESSURE
4
4
4
3
2
31 ⁄ " (800mm) - long 2x4
1
2
2
Less
Pressure
More
Pressure
BRACKET POSITION: CUTTING SETUP
2
Mount the Support Brackets in upper slots.
MOUNTING THE BENCH CLAMP
(1) Adjust the clamp anchor screw and (2) slide it into the T-slot.
USING A KREG WOOD PROJECT CLAMP
Wood Project Clamp not included
Slide the large pad into the T-slot.
2
1
Large pad