ALI PROXE70 Serie Instructions Pour Installation, D'emploi Et Entretien page 26

•
which gas can be used for the appliance.
•
the nozzles and settings foreach gas that can be
used. For nozzles, the number indicated in table T1
is also stamped on the nozzle body.
To convert the appliance to the local gas type, follow the
instructions given in atable T1 and carry out the steps
below:
•
Replace the main burner nozzle ( UM ).
•
Adjust the main burner's air regulator to distance A.
•
Replace the pilot burner nozzle ( UP ).
•
Adjust the pilot burner air flow ( if necessary ).
•
Replace the gas valve minimum nozzle ( Um ).
•
Affix the adhesive tab indicating the new type of gas
used.The nozzles and adhesive tabs are supplied
with the appliance.
REPLACING THE MAIN BURNER NOZZLE AND ADJU-
STING THE PRIMARY AIR FLOW.
•
Remove the control panel.
•
Remove the grilles, tiles and burners. (M120)
•
Slacken screw V.
•
Remove nozzle UM and replace it with the one
indicated in table T1.
•
Retighten nozzle UM.
•
Adjust air regulator Z to distance A as shown in table
T1.
26
All manuals and user guides at all-guides.com
Instructions for installation
•
Retighten screw V fully.
•
Re-assemble all parts. For assembly, proceed in
reverse order.
REPLACING THE MINIMUM ADJUSTMENT SCREW
•
Remove the control panel.
•
Remove nozzle UM and replace it with the one
indicated in table T1.
•
Retighten nozzle UM.
•
Re-assemble all parts. For assembly, proceed in
reverse order.
GAS LAVA STONE GRILL
REPLACING THE PILOT BURNER NOZZLE
•
Remove the control panel.
•
Undo connector R.
•
Remove nozzle UP and replace it with the one
indicated in table T1.
•
Retighten the connector R. Re-assemble all parts.
•
For assembly, proceed in reverse order.
13. COMMISSIONING
See Chapter " INSTRUCTIONS FOR MAINTENANCE".