Publicité
Les langues disponibles
Les langues disponibles
Problem
Some or all of the LED
lighting does not work.
Appliance makes a noise. •
'LL' code shown in the
display.
'PF' code shown in the
display.
Error code E0 shown in
the display.
Error code E1, E2 or E3
shown in the display.
Error code E9 shown in
the display.
If you are unable to solve the problem then contact the service centre. When you do so, state the
type, model and serial number shown on the type plate or label on the inside of the appliance.
Cause/Solution
•
Consult a service technician about LED lighting that is not working.
For safety reasons, you are not allowed to repair LED lighting
yourself.
•
This product contains a light source of energy efficiency class E.
The appliance is cooled by a refrigeration system with a compressor
(and with some models, also a fan) that makes a noise. The noise
level depends on the installation of the appliance, its correct use
and its age.
•
When you connect the appliance to the power supply the noise
made by the compressor or flowing refrigerant may be slightly louder.
This is not indicative of a defect, and has no effect on the service
life of the appliance. The appliance will make less noise after a while.
•
The appliance may be temporarily noisier after the door has been
opened for too long or too frequently, a large quantity of fresh food
has been put in the appliance or the intensive freezing or intensive
cooling function has been activated.
Child lock has been activated. See the chapter 'Child Lock'.
Lengthy power failure. See the chapter 'Power failure alarm'.
The touch keys do not respond. Call the service centre to make an
appointment for repair work. The appliance operates in the safe mode
until it has been repaired. The appliance automatically retains the most
suitable temperature for each compartment.
A temperature sensor is defective. Call the service centre to make an
appointment for repair work. The appliance operates in the safe mode
until it has been repaired. The appliance automatically retains the most
suitable temperature for each compartment.
•
A door has been open for too long: close the door.
•
If the lighting in the compartment has also stopped working then
the door sensor is defective. Call the service centre to make an
appointment for repair work. The appliance operates in the safe
mode until it has been repaired. The appliance automatically retains
the most suitable temperature for each compartment.
Faults
31
Publicité
