Publicité
IFBMW-S PLUG&PLAY INTEGRATION
U s e r m a n u a l
Tweeter oriented part die cut (see page 16).
You can used the IFBMW-S in a "non equipped" 2 way component BMW® car.
You have 2 possibilities :
1. Order to your BMW® car seller, the original spare part dedicated for your car (in case of a hifi system) (different
parts either with a plastic part behind the mirror, either a full door trim).
2 x Ø 4 mm
2. Use our tweeter part supplied in the IFBMW-S kit (in this case, please read carefully the instruction below)
∙ Cut the templates (scale 1 :1) enclosed to this service manual (respect the right side).
∙ Adjust the templates on the Factory plastic parts.
∙ Adjust the focal tweeter support (supplied in the IFBMW-S kit) (REF HPPT1145 left side or HPPT1146 right side)
to find the best staging and aesthetic in your car.
∙ Drill holes for the 2 screws and the focal wire (diameter = 4mm for the 2 screw and 12 mm for the wire hole).
∙ Screw the 2 vis (from the interior of the original plastic part).
∙ Mount the tweeter and lock it thanks to the grey ring with the FOCAL logotyp (which might be in down position).
Your Focal-JMlab product was developed and manufactured with high-quality materials and components
which can be recycled and/or re-used. This symbol indicates that electrical and electronic equipment
must be disposed of separately from normal garbage at the end of its operational lifetime.Please dispose
of this product by bringing it to your local collection point or recycling centre for such equipment. This will
help to protect the environment in which we all live.
Ø12 mm
HPPT1145 - Left
HPPT1146 - Right
8
Publicité
