General Information - WIKA DPGS40TA Mode D'emploi

1. General information

1. General information
The instrument described in the operating instructions has been designed and
■
manufactured using state-of-the-art technology. All components are subject to
stringent quality and environmental criteria during production. Our management
EN
systems are certified to ISO 9001 and ISO 14001.
These operating instructions contain important information on handling the
■
instrument. Working safely requires that all safety instructions and work instruc-
tions are observed.
Observe the relevant local accident prevention regulations and general safety
■
regulations for the instrument's range of use.
The operating instructions are part of the product and must be kept in the
■
immediate vicinity of the instrument and readily accessible to skilled personnel
at any time.
Skilled personnel must have carefully read and understood the operating ins-
■
tructions prior to beginning any work.
The manufacturer's liability is void in the case of any damage caused by using
■
the product contrary to its intended use, non-compliance with these operating
instructions, assignment of insufficiently qualified skilled personnel or unautho-
rised modifications to the instrument.
The general terms and conditions contained in the sales documentation shall
■
apply.
Subject to technical modifications.
■
Further information:
■
- Internet address:
- corresponding data sheets: PV 27.22
Explanation of symbols
4
www.wika.de / www.wika.com
WARNING!
... indicates a potentially dangerous situation that can result in
serious injury or death, if not avoided.
Information
... points out useful tips, recommendations and information for
efficient and trouble-free operation.
WIKA operating instructions DPGS40TA with component testing