ANSMANN NIGHTLIGHT NL10AC Mode D'emploi page 11

Risk of damage!
m
§Improper handling of the
LED nightlight can result in
damage.
§Do not continue to use the
LED nightlight if the plas-
tic components of the LED
nightlight are cracked, torn
or deformed.
§Do not expose the LED
nightlight to extreme tem-
peratures or severe mecha-
nical loads. Otherwise, this
can result in deformation of
the LED nightlight.
Deutsch | English | Français | Español | Português | Svenska
Italiano | Nederlands | Dansk | Suomi | Norsk
TECHNICAL DATA
Input voltage:
Illuminant:
Luminous flux:
Colour temperature:
Sensor:
Protection class:
Plug type:
Operating tempe-
rature:
Weight:
Dimensions:
USE
The nightlight has an automatic twilight sensor.
Insert the mains plug of the nightlight into a properly
installed mains wall socket.
Thanks to the twilight sensor, the LED nightlight
switches on automatically when darkness falls and
switches off automatically during daylight.
220V-240V~ 50-60Hz
SMD LED 0.45W, permanently
installed
ca. 5lm
ca. 3000K
CSD light sensor
II
EU plug
0°C to 40°C
53.9g
60 x 60 x 54.5mm
11