Télécharger Imprimer la page

Uline H-3579 Mode D'emploi page 2

Publicité

Les langues disponibles

Les langues disponibles

GROUNDING INSTRUCTIONS
This appliance must be grounded. If it should
electrically malfunction, grounding provides a path
of least resistance for electric current to reduce the
risk of electric shock. This appliance is equipped with
a cord having an equipment-grounding conductor
and grounding plug. The plug must be plugged into
an appropriate outlet that is properly installed and
grounded in accordance with all local codes and
ordinances.
DANGER! Improper connection of the
equipment-grounding conductor can result in
a risk of electric shock.
• Check with a qualified electrician or service
person if you are in doubt as to whether the
outlet is properly grounded.
• Do not modify the plug provided with the
appliance. If it will not fit the outlet, have
a proper outlet installed by a qualified
electrician.
NOTE: For North America only:
This appliance is for use on a nominal 120-volt circuit
and has a grounding pin. (See Figure 1)
Figure 1
Grounding Pin
A temporary adapter (See Figures 2 and 3) may be
used to connect this plug to a 2-pole receptacle as
shown in Figure 2 if a properly grounded outlet is not
available. The temporary adapter should be used
only until a properly grounded outlet (Figure 1) can be
installed by a qualified electrician.
PAGE 2 OF 12
OPERATION
Figure 2
Adapter
Figure 3
The green-colored rigid ear or tab extending from
the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover.
Whenever the adapter is used, it must be held in
place by a metal screw. Grounding adapters are not
Grounded
approved for use in Canada.
Outlet
Grounded
The green (or green/yellow) wire in the cord is the
Outlet Box
grounding wire. When replacing a plug, this wire must
be attached to the grounding pin only.
Extension cords connected to this machine should be
12 gauge, three-wire cords with three-prong plugs and
outlets.
Metal Screw
Adapter
WARNING! Replace the plug if the grounding
pin is damaged or broken.
CAUTION! DO NOT use extension cords more
than 50 feet (15 m) long.
Grounded
Outlet Box
Tab for
Grounding Screw
0224 IH-3579

Publicité

loading

Ce manuel est également adapté pour:

H-4702