Mitsubishi Diamond Pro 2070 SB Mode D'emploi page 14

Specifications
Monitor
Specifications
Diagonal:
Picture Tube
Viewable Image Size:
Radius:
Video:
Input Signal
Sync: Separate sync. TTL Level
Analog input:
Display Colors
Horizontal:
Synchronization
Vertical:
Range
Resolutions Supported
Resolution based on horizontal and
vertical frequencies only
Horizontal:
Active Display Area
Vertical:
(Factory Setting)
Active Display Area
(Full Scan)
Power Supply
Monitor:
Current Rating
Monitor + USB Hub:
Dimensions
Weight
Environmental Considerations
Operating Temperature:
Humidity:
Altitude:
Storage Temperature:
Humidity:
Altitude:
Diamond Pro 2070
Monitor
22 inch/55 cm
20 inch/508 mm
50000 mm
ANALOG 0.7 Vp-p/75 Ohms
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. (Negative) (TTL Level)
Sync on Green video (Positive) 0.7Vp-p and sync.
Negative 0.3Vp-p
Unlimited number of Colors
30 kHz to 140 kHz
50 Hz to 160 Hz
640 x 480 @ 50 to 160 Hz
800 x 600 @ 50 to 160 Hz
1024 x 768 @ 50 to 160 Hz
1280 x 1024 @ 50 to 127 Hz
1600 x 1200 @ 50 to 109 Hz .................... NEC-Mitsubishi Electronics Display cites
1800 x 1350 @ 50 to 98 Hz
1800 x 1440 @ 50 to 92 Hz
1856 x 1392 @ 50 to 95 Hz
1920 x 1440 @ 50 to 92 Hz
2048 x 1536 @ 50 to 86 Hz
396 mm/15.6 inches
297 mm/11.7 inches
406 mm/16.0 inches
304.6 mm/12.0 inches
AC 100 – 120 V/220 - 240 V, 50/60 Hz
1.35A @ 100 – 120 V / 0.65A @ 220-240 V
1.5A 100-120V / 0.7A 220-240V
495 mm (W) x 484.5 mm (H) x 471 mm (D)
19.8 inches (W) x 19.4 inches (H) x 18.8 inches (D)
29.8 kg
65.7 lbs
+5°C to +35°C/+41°F to +90°F
10% to 90%
0 ft (0 m) ~ 10,000 ft (3,000 m)
-20°C to +60°C/-4°F to +140°F
10% to 90%
0 ft (0 m) ~ 50,000 ft (15,000 m)
NOTE: Technical specifications are subject to change without notice.
12
SB Notes
90° deflection, 0.24 mm grille pitch,
medium short persistence phosphor,
aperture grille CRT, G-WARAS coating
Depends on display card used.
Automatically
Automatically
Some systems may not support
all modes listed.
recommended resolution a 85 Hz for
optimal display performance.
Dependent upon signal timing used,
and does not include border area.
Dependent upon signal timing used,
and does not include border area.