Domo PIET HUYSENTRUYT DO9071KR Mode D'emploi page 41

FITTING MEAT GRINDER
Turn the device off, and take the plug out of the socket before you add, remove or
clean any accessories.
1. Open the lid by pressing the release button and pushing it upwards.
2. The connecting point for accessories can be seen.
3. Place the meat grinder at an angle of 25 ° to the connection point and tighten it by
making a quarter turn clockwise. You hear a click when this is securely fastened.
Your meat grinder is now in a perfect vertical position.
4. For grinding meat insert in succession: the worm wheel and the cutting knife.
5. Then make a selection from the grinding discs, fine, medium or coarse.
6. Position the notch on the disc at the height of the projecting catch.
7. Connect it altogether with the screw ring.
DO9071KR_booklet revised safety measures 2012.indd 41
1
4
5
41
2 3
6
DO9071KR
4
7
3/10/12 11:06