Domo PIET HUYSENTRUYT DO9071KR Mode D'emploi page 40

DO9071KR
6. Make a quarter turn backwards on the release button so that the head falls
downwards. Then push the head back into its original position until you hear a
click.
CLEANING
1. Always remove the plug from the socket before cleaning the device.
2. Never immerse the engine unit in a bowl of water or under running water. Clean
the engine unit with a soft damp cloth.
3. Disassemble all accessories according to the user instructions in the section
"Disassembling".
4. For quick cleaning, rinse the accessories under running water.
5. For thorough cleaning, wash, rinse and dry the accessories.
FITTING VEGETABLE CUTTER
Turn the device off, and take the plug out of the socket before you add, remove or
clean any accessories.
1. Open the lid by pressing the release button and push it upwards.
2. The connecting point for accessories can be seen.
3. Place the vegetable cutter at an angle of 25 ° to the connection point and tighten
it by making a quarter turn clockwise. You hear a click when this is securely
fastened. Your vegetable cutter is now in a perfect vertical position.
1
4. With the push rod you can safely place vegetables in the vegetable cutter.
5. Push the grater fully into the opening of the vegetable cutter.
6. You can choose between a cutter and two types of graters.
To remove the vegetable cutter, press on the release button. Make a quarter turn
clockwise on the vegetable cutter. Clean all parts thoroughly and dry carefully before
using it again.
DO9071KR_booklet revised safety measures 2012.indd 40
2
5
4
40
3
6
3/10/12 11:06