Using The External Module; Technical Specifications - SOMFY VSYSTEMPRO Manuel D'installation

EN

9 USING THE EXTERNAL MODULE

The external may be equipped with 1 or 2 call buttons depending on the type of property.
When a visitor presses the call button, a bell rings in the corresponding property and the
monitor(s) display(s) the video filmed by the external module camera.
When a person accepts communication on a monitor, the external module microphone
and speaker are activated until communication is cut-off from the monitor or until the
maximum time configured on switch 6 has elapsed (see Section 5.1 Switch No. 28, page
9).
The external module may be connected to:
- a code keypad (ref. 1841220)
- a module with several call butotns (available in 2017).
For configuration and use of these products, see the specific instructions.
10 TECHNICAL SPECIFICATIONS
Power supply
Electrical
consumption
Camera angles
Operating temperature
13
in stand-by
operational
Origin module
Bus line
50 mA
165 mA
H: 74° - V: 55°
(ajustable by ± 10°)
-20/+50 °C
Copyright © 2016 Somfy SAS. All rights reserved.
Premium module
H: 160° - V: 101°