Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE
1
2
Removing filter cassette
1
Switch off the flap and lighting.
2
Using the recess, press the filter backwards and tip it downwards
at the front.
3
Remove the filter from the hood.
Cleaning
You can clean the filters in the dishwasher. Allow them to drain fully
before reinstalling them in the hood.
The filters may also be cleaned by hand.
Clean the filters in water and washing-up liquid and rinse them. Allow
the filters to drain fully. The underside of the extractor hood can be
cleaned with a mild cleaning agent and a moist cloth. Then dry it off
with kitchen towel or a dry cloth.
Reinstalling the aluminium grease filter
1
Place the filter in the grille.
2
Refit the wire brackets.
3
Place the grille back in the extractor hood. First press the back
into the hood; then the front. The filter will now click into place.
4
Lock the filter in place by pushing the locking projections
A
outwards.
Reinstalling filter cassette
The filter has to be installed with the locking mechanism at the front.
Open the locking mechanism. This pulls the projections at the front of
the filter inwards. When installing the filters hold the locking mechanism
in this position.
1
Push the projections at the back of the filter into the openings
provided for this purpose at the rear of the extractor hood.
2
Hinge the filter upwards.
3
Release the locking mechanism. The projections at the front
of the filter move outwards into the openings provided for this
purpose at the front of the extractor hood.
The filter is now correctly positioned.
GB 9
Publicité
