Atag KA2411R/A04 Notice D'utilisation page 19

The set temperature will be
reached within 24 hours.
After a power failure the set
temperature remains stored.
DrinksChill function
The DrinksChill mode is to be used to set
an acoustic alarm at the preferred time,
useful, for example, when you want to
rapidly chill food products for a certain
length of time.
1. To switch on the function press
Functions button until the
corresponding icon appears.
The DrinksChill indicator flashes.
The timer shows the set value (30
minutes) for a few seconds.
2. Press the temperature colder button or
temperature warmer button to change
the Timer set value from 1 to 90
minutes.
3. Press OK to confirm.
DrinkChill indicator is shown. The Timer
starts to flash (min).
At the end of the countdown the
DrinksChill indicator flashes and an
audible alarm sounds.
4. Press OK to switch off the sound and
terminate the function.
It is possible to deactivate
the function at any time
during the countdown by
pressing Functions until
DrinksChill indicator flashes
and then pressing OK to
confirm.
It is possible to change the
time during the countdown
and at the end by pressing
the temperature colder
button and the temperature
warmer button.
Fan function
1. To activate the function press the
Functions until the corresponding icon
appears.
The Fan indicator flashes.
2. Press the OK to confirm.
The Fan indicator is shown.
3. To switch off the function, repeat the
steps until the Fan indicator goes off.
The activation of the Fan
function increases the energy
consumption.
If the function is activated
automatically the Fan indicator
is not shown (refer to "Daily
use ").
ChildLock function
To lock any possible operation through the
buttons select the ChildLock function.
1. Press Functions button until the
corresponding icon appears.
The ChildLock indicator flashes.
2. Press OK to confirm.
The ChildLock indicator is shown.
3. To switch off the function press
Functionsbutton until ChildLock
indicator flashes, then press OKto
confirm.
The ChildLock indicator goes off.
IntensiveCooling
If you need to insert a large amount of
warm food, for example after doing the
grocery shopping, we suggest activating
the IntensiveCooling to chill the products
more rapidly and to avoid warming the
other food which is already in the
refrigerator.
The IntensiveCooling shuts off
automatically after approximately 6 hours.
1. To switch on the function:
a. Press Functions until the
corresponding icon appears.
The IntensiveCooling indicator flashes.
b. Press OK to confirm.
The IntensiveCooling indicator is shown.
2. To switch off the function before its
automatic end:
a. Press Functions until the
IntensiveCooling indicator flashes.
19