Topcom BPM ARM 6331 Manuel D'utilisateur page 8

TOPCOM BPM Arm 6331
10 Measurement
10.1 Important
1. This monitor automatically switches off 1 minute after the last key operation.
2. To interrupt the measurement, simply press any key. The cuff will deflate
immediately after a key is pressed.
3. During the measurement, do not talk or move your arm or hand muscles.
4. After each measurement, the result will be automatically stored. The BPM ARM
6331 has 3 memory zones with each 30 location. Select the desired Memory Zone
before measurement (see §11)
10.2 Procedure
mmHg
mmHg
8
6. When the cuff is positioned
properly, press the Velcro firmly
against the pile side of the cuff. The
metal ring will not touch your skin.
7. Relax your entire body,especially
the area between your elbow and
fingers. Place your elbow on a
table so that the cuff is at the same
level as your heart. Avoid leaning
back while the measurement is
being taken.
1. Press the SET button repeatedly to
select the desired memory zone.
2. Press the START/STOP button to
start measurement. The cuff will
inflate to the level that is right for
you.
3. When the right level is reached, the
cuff will deflate.