Télécharger Imprimer la page

Bissell POWERTRAK POWERFORCE 31L9 Serie Guide De L'utilisateur page 13

Publicité

Les langues disponibles

Les langues disponibles

M
aintenance and care
Cleaning the inner cyclone & screen
1.
Unplug the vacuum from the electrical outlet.
2.
Remove the dirt container from the vacuum.
3.
Remove the top portion of the dirt container by
grasping the carry handle and turning counter
clockwise and pulling up and out of the dirt
container.
4.
Remove the inner cyclone by grasping the
bottom of the cyclone and turning counter
clockwise to unlock. Pull straight down to
remove. Clean with a cloth to remove dust and
debris
5.
Remove the screen by pulling straight down.
Clean with a cloth or a soft brush to remove
dust and debris.
6.
The tank may also be wiped clean with a
damp cloth. Make sure the tank is completely
dry before reassembling.
7.
To reassemble, hold the carry handle and
place the screen back onto the top portion of
the dirt container. Be sure to align the notch
on the top with the insert on the flat edge of
the screen. Then place the inner cyclone back
into the screen by aligning the notches at the
top of the inner cyclone with the inserts inside
the screen and turning clockwise to lock into
place.
8.
Place the top portion back onto the dirt
container by grasping the carry handle and
turning clockwise to lock into place. Be sure
that the dirt container release button is aligned
with the emptying button when locked into
place.
10
w w w . b i s s e l l . c a
w w w . b i s s e l l . c a
3.
4.
5.
8 0 0 . 2 6 3 . 2 5 3 5
1 - 8 0 0 . 2 6 3 . 2 5 3 5
11

Publicité

loading