AXIL RT0420T2 Manuel D'utilisation page 73

6. TROUBLESHOOTING
Problem
No picture
Screen shows "No Signal"
No sound from Speaker
Only sound, no image on
the screen
Remote Control is not
responding
Picture is breaking up
Potential Reasons
Power isn't connected
The power switch is not on
DVB-T cable not connected
Aerial cable is faulty
No or incorrect connection
with audio cable
Sound on mute
Resolution not supported
by TV set
No or incorrect connection
with AV cable
The program is a radio
program
The battery is exhausted
Remote Control is not
facing or close enough to
the Set Top Box
The signal is too weak
73
What to do
Connect the power
Switch on the power
Plug in the DVB-T cable
Check aerial cable and
connections
Connect the audio cable
correctly
Turn off mute function
Press Red Color button to
change resolution
Make sure cables are
connected correctly
Press<TV/RADIO>key to
shift into TVmode
Change battery
Adjust the position of the
Remote Control and move
closer to the unit
Check aerial cable and
connections