General Information - WIKA NS100 Mode D'emploi

1. General information

1. General information
The pressure gauge described in the operating instructions has been designed
„
and manufactured using state-of-the-art technology.All components are subject
EN
to stringent quality and environmental criteria during production. Our manage-
ment systems are certified to ISO 9001 and ISO 14001.
These operating instructions contain important information on handling the
„
pressure gauge. Working safely requires that all safety instructions and work
instructions are observed.
Observe the relevant local accident prevention regulations and general safety
„
regulations for the pressure gauge's range of use.
The operating instructions are part of the product and must be kept in the
„
immediate vicinity of the pressure gauge and readily accessible to skilled
personnel at any time.
Skilled personnel must have carefully read and understood the operating
„
instructions prior to beginning any work.
The manufacturer's liability is void in the case of any damage caused by using
„
the product contrary to its intended use, non-compliance with these operating
instructions, assignment of insufficiently qualified skilled personnel or unauthor-
ised modifications to the pressure gauge.
The general terms and conditions contained in the sales documentation shall
„
apply.
Subject to technical modifications.
„
Further information:
„
- Internet address:
- Relevant data sheet:
Explanation of symbols
4
WARNING!
... indicates a potentially dangerous situation that can result in
serious injury or death, if not avoided.
Information
... points out useful tips, recommendations and information for
efficient and trouble-free operation.
WARNING!
... indicates a potentially dangerous situation in the hazardous area
that results in serious injury or death, if not avoided.
WIKA operating instructions pressure gauge, model 4 per ATEX
www.wika.de / www.wika.com
PM 04.03, PM 04.07